Panasonic PT-DZ16K2E Installation Projector

IDR699,553,428.00
In stock
SKU
PT-DZ16K2E (W/O LENSE)

100% Authentic Product

Guaranteed Authentic Product

Huge Selection

Projectors and related products

Safe Payment

Safe Shopping Guarantee

Support 24/7

Always Feedback to Customer 24/7

PANASONIC PT-DZ16K2E LARGE VENUE FULL HD PROJECTOR


 

Power Supply 200-240 V AC, 50/60 Hz
Power Consumption 2,060 W (0.3 W with STANDBY MODE set to ECO,*1
4 W with STANDBY MODE set to NORMAL.)
DLP™ chip Panel Size 24.1 mm (0.95 in)
diagonal (16:9 aspect ratio)
Display Method DLP™ chip x 3, DLP™ projection system
Pixels 2,073,600 (1,920 x 1,080) x 3, total of 6,220,800 pixels
Refresh Rate 120 Hz*2
Lens Optional powered zoom and fixed-focus lenses
Lamp Normal UHM lamp x 4 (432 W), replacement cycle of up to 3,000 hours*3
Portrait UHM lamp x 4 (432 W), replacement cycle of up to 700 hours
Screen Size (diagonal) 1.78-25.4 m (70-1,000 in),
1.78-7.62 m (70-300 in)
with the ET-D75LE50,
3.05-15.24 m (120-600 in)
with the ET-D75LE90,
1.78-15.24 m (70-600 in)
with the ET-D75LE8,
16:10 aspect ratio
Brightness*4 16,000 lm (four-lamp)
Corner-to-Corner Uniformity 90%
Contrast*4 10,000:1 (full on/off, with dynamic iris set to “3” )
Resolution 1,920 x 1,080 pixels*5
Scanning Frequency SDI SD-SDI SMPTE ST 259 compliant,
[YCBCR 4:2:2 10-bit] 480i, 576i
HD-SDI SMPTE ST 292 compliant,
[YPBPR 4:2:2 10-bit] 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
3G-SDI SMPTE ST 424 compliant,
[YPBPR 4:2:2 10-bit] 1080/50p, 1080/60p, [RGB 4:4:4 12-bit /10-bit] 1080/50i, 1080/60i, 1080/25p,
1080/24p, 1080/24sF, 1080/30p
HDMI/DVI-D/
DIGITAL LINK
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF,
1080/25p, 1080/30p, 1080/60p, 1080/50p, VGA (640 x 480)-WUXGA*6 (1920 x 1200),
compatible with non-interlaced signals only, dot clock: 25-162 MHz
DVI-D/HDMI
simultaneous input
1920 x 1200p, 1920 x 1080p, 1400 x 1050p, 1366 x 768p, 120 Hz/100 Hz
RGB fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 13.5-162 MHz
YPBPR (YCBCR) fH: 15.75 kHz, fV: 60 Hz [480i (525i)]
fH: 15.63 kHz, fV: 50 Hz [576i (625i)]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1035 (1125)/60i
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]
fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p]
fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p]
fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p]
fH: 31.50 kHz, fV: 60 Hz [480p (525p)]
fH: 31.25 kHz, fV: 50 Hz [576p (625p)]
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i
fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p]
fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF]
fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p]
Video/YC fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical Axis Shift*7 Vertical ±60 % (±50 % with the ET-D75LE6,
+75 - +88 % with the ET-D75LE90) (powered)
Horizontal ±20 % (±15 % with the ET-D75LE6,
-12 % - +14 %with the ET-D75LE90) (powered)
Keystone Correction Range Vertical: ±40°, horizontal: ±15°
Installation Ceiling/floor, front /rear
Terminals SDI IN BNC x 1 (3G/HD/SD-SDI)
DVI-D IN DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
HDMI IN HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
RGB 1 IN BNC x 5 (RGB/YPBPR/YCBCR/VIDEO/YC x 1)
RGB 2 IN D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
SERIAL OUT D-sub 9-pin (male) x 1 for link control
REMOTE 1 IN M3 x 1 for wired remote control
REMOTE 1 OUT M3 x 1 for link control (for wired remote control)
REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel)
LAN/DIGITAL LINK RJ-45 x 1 (for network, DIGITAL LINK connection, 100Base-TX, compatible with Art-Net, PJLink™ (class 1), Deep Color, HDCP)
Cabinet Materials Moulded plastic
Dimensions (W x H x D) 620 x 255 x 730 mm (24-13/32 x 10-1/32 x 28-3/4 in)
(optional lens, legs and lens cover not included)
Weight*8 Approx. 43 kg (94.8 lbs) (optional lens not included)
Operation Noise*4 46dB
Operating Environment Operating temperature: 0-45°C (32-113°F)*9,
operating humidity: 10-80 % (no condensation)
Applicable Software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software
Supplied Accessories Power cord with secure lock, wireless/wired remote control unit, batteries (R6/AA type x 2), software CD-ROM (Logo Transfer Software, Multi Monitoring & Control Software)
NOTE *1 When Standby Mode is set to Eco, network functions such as power on over LAN will not operate.
Additionally, only certain commands can be received for external control using the serial terminal.
*2 Refresh rate varies depending on scanning frequency.
*3 This value (maximum, 50 % brightness) is calculated by continuously turning the lamp on for 2 hours and off for 0.25 hours.
The lamp replacement cycle will decrease if the lamp is turned on/off more frequently, or if it is left on for longer intervals.
*4 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*5 Input signals that exceed the native resolution will be converted to the native resolution.
*6 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
*7 Optical axis shift is not supported on the ET-D75LE50.
*8 Average value. May differ depending on the actual unit.
*9 Operating temperature range is 0–40 °C (32–104 °F) when Fan Control is set to High Altitude Mode for altitudes 1,400–2,700 m (4,593–8,858 ft)
above sea level. With ET-LAD520P/LAD520PF mounted for Portrait Mode, operating temperature range is 0–40 °C (32–104 °F).
More Information
MODELPT-DZ16K2E
TECHNOLOGYDLP
BRIGHTNESS16000 LUMENS
CONTRAST10,000:1
RESOLUTIONFull HD (1920 x 1080)
WEIGHT43 kg
LAMP LIFE3000 HOURS
WARRANTY3 YEARS
Write Your Own Review
You're reviewing:Panasonic PT-DZ16K2E Installation Projector